Mariner 200 Verado

Description

• Supercharged, intercooled induction system with PCM 03-controlled electronic boost valve.
• Patented supercharger air induction system with highly tuned intake resonator delivers an intake sound reduction of up to 14dBA in the mid-range to full throttle without sacrificing engine performance.
• In-line 6-cylinder engine platform.
• Direct-acting 24-valve double overhead cam (DOHC).
• Standard SmartCraft DTS (Digital Throttle & Shift)
• Oil jet piston cooling system
• Thermally isolated oil sump with exclusive thermostatically controlled oil cooling module
• Isolated engine cowling system
• High-performance AMS (Advanced MidSection) progressive rate perimeter mount system.
• SmartCraft-programmable 2-speed power trim and tilt.
• Standard electro-hydraulic power steering
• Integral electro-hydraulic power steering cylinder

• Propshaft Rated Horsepower:    200hp (149kw)
• Max RPM at Full Throttle:    5800-6400
• Cylinders/Engine Configuration:    Straight-6, 24-valve, direct-acting double overhead cam (DOHC)
• Displacement:    158.5 cu in. (2.6L) (2598cc)
• Bore/Stroke:    3.23" x 3.23" (82mm x 82mm)
• Induction System:    SmartCraft DTS Electronic throttle, supercharged with charge air cooling and electronic boost pressure control
• Fuel System:    Computer-controlled sequential multiport Electronic Fuel Injection (EFI)
• Fuel Requirements:    Unleaded regular 87-octane minimum (R+M/2)
• Ignition System:    SmartCraft PCM 03 digital inductive
• Charging System:    Fully regulated belt-driven 70-amp (882 watt)
• Starting:    Electric (turn-key)
• Exhaust System:    Through prop
• Cooling System:    Water-cooled with thermostat & pressure control
• Lubrication System:    Integrated dry sump
• Oil Requirement    NMMA - certified FCW SAE 25W-40
• Oil Capacity    8.5qt (8.0L)
• Engine-Management System:    SmartCraft PCM 03
• Engine Control System:    SmartCraft Digital Throttle & Shift (DTS)
• Engine Protection System:    SmartCraft Engine Guardian
• Gear Shift:    SmartCraft DTS, F-N-R
• Gear Ratio:    1.85:1
• Driveshaft Lengths:    20" (L), 25" (XL, CXL)
• Counter-rotation:    Available on 25" (CXL) models
• Trim/Tilt System:    SmartCraft-programmable power trim and tilt (as measured on a 14 degree transom) 73 degree (-6 to 67 degree), 20 degree (-6 to 14 degree)
• Steering System:    Electro-hydraulic power steering with integral hydraulic cylinder
• Comparative Weight:    20"(L) - 635lb 288kg; 25"(XL,CXL) 649lb 294kg
•    

Enquire Now!

Name:
Phone:
Email Address:
Outboard:
Enquiry:
	Please enter anti-spam verification code.